Modecom MC-WR11 Manuel d'utilisateur télécharger pdf (Page 6)

www.modecom.eu

Wireless router

LAN(1,2,3,4): 10/100Mbps RJ45 Auto-sensing. These four LAN ports are

where you will connect other network devices, such as PCs/Laptops, print

servers, remote hard drives, and anything else you want to put on your net-

work. If you connect this product with the Network adapter, Hub (or Switch)

correctly, the Router’s corresponding LED and the Adapter’s, Hub’s (or the

Switch) will illuminate.

WAN: 10/100Mbps RJ45 port. The WAN port is where you will connect

Cable/DSL Modem or other LAN.

RESET(WPS): The Reset Button has three functions, WPS, reboot and

Factory Default. When press it less than 2 second, it is WPS function and

the SYS LED will ash two minute (as long as WPS session is active); 2 to

5 seconds, the router will reboot; and more than 5 seconds, the router will

restore to factory default settings.

Power inlet: 9V DC, 1A Power supply.

2.3 Typical install

1. Make sure all devices, including your PCs, modem, and Router, are

turned on.

2. Using an Ethernet network cable, connect the LAN device or Ethernet

network port of the cable or DSL modem to the Router’s WAN port.

1 2 3 4 5 6 7 8 9 10 11 ... 67 68

Pas de commentaire

Modecom MC-WR11 Manuel d'utilisateur Page 6